Product show case > Wireless Connectivity Series > Require External Wireless Module > Digital Multimeter
Wireless Digital Multimeter 4000 count / NCV / SPT / Anti Burn Protection and with Max./Min./Max.-Min. display
 
Introduction :


    This is a external wireless connectivity Digital Multimeter integrated with 4000 Count, True RMS auto and manual measurement.

    One of the most advantages of the meter is wirelessly connect to Smart phone / Tablet / PC (require different external modules, sold separately) to view data, record reading, capture picture with data on it and send the information to headquarter.

    Specifications :


      - True RMS
      - 4000 counts (3-3/4 digit)
      - Auto / Manual ‘V’ (AC / DC) (600V / 1000V)
      - Auto / manual resistor measurement : 0 - 40MΩ (approx.)
      - Continuity check : <50Ω Beep
      - Diode check : 3.0 V
      - μA / mA / 10A (AC / DC) current
      - ‘NCV’ Non-Contact AC Voltage Detection (Audible and Visible) > 100V
      - ‘SPT’ Single Probe Test AC Voltage (Audible and Visible) > 100V
      - Freeze / Hold reading
      - Auto power off : 5 mins
      - Relative reading (Rel)
      - Frequency 10Hz - 10MHz
      - Max. / Min. / Max. - Min. reading recorded
      - 'AC / DC external current clamp adaptor 400A input, 1mV=1A
      - LCD display with backlight
      - Fitted with 400mA (Ø5x20mm) / 10A fast blow fuse
      - Anti Burn Protection (ABP) on full range and up to 250V (AC / DC) (NOT AT CURRENT RANGE)
      - Standalone mode : without external wireless module
      - Wireless connectivity transmit data  to Smart phone/Tablet with iOS APPS or Android APPS (require external wireless module MS-WMB1, sold separately)
      - Data logger compatible (require external wireless with memory module MS-WMBM1, sold separately)
      - Battery powered : 1 x 9V (6F22 / 6LR61 / 1604) 
      - Dimension (LxWxD) mm : 180x100x33
      - Weight (approx.) grams : 230 (without battery)
Item no.MS-W2044P2
Further DetailsMS-W2044P2_TE4.jpg