Product show case > Wireless Connectivity Series > Require External Wireless Module > Clamp Meter
Wireless Connectivity AC / DC Clamp Meter with 6000 count / NCV / SPT / 600A / 1000A (AC / DC) current
 
Introduction :


    This is a external wireless connectivity digital clamp meter integrated with AC / DC hall effect sensor, 3-3/4 Digit 6000 Count, True RMS, auto and manual measurement.

    Advance features :

      -Wide response band width.
      -Large LCD display.
      -Audible sound and visible indication during continuity check.
      -Non-contact (patented) numerical digital display AC voltage strength with audible and LED indication.
      -Single probe test ‘SPT’to identify ‘Live / Hot’ wire in AC circuit with audible sound and visible indication.
      -Non-contact Frequency detection ‘NCF’50 / 60 Hz
      -Software calibrated.

      Specifications :


        -True RMS
        -6000 counts (3-3/4 digit)
        -Auto / Manual ‘V’ (AC / DC) (600V)
        -Auto / Manual ‘V’ (AC ) with Hz / % selectable
        -Auto / manual resistor measurement
        -Continuity check : <50Ω Beep
        -Diode check : 3.000V
        -600A / 1000A (AC / DC) current
        -AC current with Hz / % selectable
        -Capacitance : 10nF - 100mF
        -Frequency 10Hz - 10MHz
        -Hz / Duty cycle 1-99%
        -‘NCV’ Non-Contact AC Voltage Detection (Audible and Visible) > 100V : Numerical digital display AC voltage strength
        -‘SPT’ Single Probe Test AC Voltage (Audible and Visible) > 100V
        -Freeze / Hold reading
        -Auto power off : (5 mins) or always 'ON'
        -‘NCF’ Non-Contact Frequency Detection
        -Relative reading (Rel)
        -Input impedance 10MΩ
        -‘ OL ’ Over range display
        -Low battery indication (2.6V approx.)
        -Maximum Conductor diameter for measurement (mm) < Ø50
        -Maximum open jaw (mm) : Ø50
        -Measureable temperature from thermocouple -50°C ~ 1000 °C (-58°F ~1832°F) 
        -'K' type temperature Ni-Cr and Ni-Si sensor, temperature range measureable -40°C ~ 250°C ( -40°F ~ 482°F) to be provided
        -Standalone mode : without external wireless module
        -Wireless connectivity transmit data  to Smart phone/Tablet with iOS APPS or Android APPS (require external wireless module MS-WMB1, sold separately)
        -Data logger compatible(require external wireless with memory module MS-WMBM1, sold separately)
        -Battery powered : 2 AAA (R03 / LR03 )
        -Dimension (LxWxD) mm : 208x77x35
        -Weight (approx.) grams : 180 (without battery)
Item no.MS-W376DFT
Further DetailsClamp Meter W376DFT_TE4