Product show case > Wireless Connectivity Series > Require External Wireless Module > Digital Multimeter Detector
Wireless Connectivity Digital Multimeter Detector with 6000 count. MS-WDMMD43
 
Introduction :


    This is a external wireless connectivity Digital Multimeter Detector integrated with 6000 Count, True RMS, auto and manual measurement.

    One of the most advantages of the meter is wirelessly connect to Smart phone / Tablet / PC (require different external modules, sold separately) to view data, record reading, capture picture with data on it and send the information to headquarter.

    Key Specifications/Special Features :



      - True RMS
      - 6000 counts (3-3/4 digit)
      - Auto/manual range
      - Large LCD display with backlight
      - Auto / Manual V (AC / DC) (600V / 1000V)
      - 'μA / mA / 10A (AC / DC)
      - 'AC / DC external clamp adaptor input 600A, 1mV=1A
      - Auto/manual resistor measurement : 0 - 60MΩ (approx.)
      - Continuity check : <50Ω Beep buzzer sounds
      - Capacitance : 10nF - 100mF
      - Diode check : 3.0 V
      - Input impedance 10MΩ
      - NCV Non-Contact AC Voltage Detection (Audible and Visible) > 100V
      - NCF Non-Contact Frequency Detection
      - Freeze / Hold reading
      - Auto-power off (APO) : 5 mins approx.
      - Relative reading (Rel)
      - Frequency / Duty cycle (Hz / % ) (10 - 10MHz / 1-99%)
      - Measureable temperature from thermocouple -50C ~ 1000C (-58F ~ 1832F)
      -K type temperature Ni-Cr and Ni-Si sensor, temperature range measureable -40C ~ 250C (-40F ~ 482F) to be provided
      - Max. / Min. / Max. - Min. display
      - Lοw battery indication (2.6V approx.)
      - Fused test leads tted with replaceable 600mA (6x32mm) and 10A (10x38mm) fast blow fuse (included)
      - Standalone mode : without external wireless module
      - Wireless connectivity transmit datato Smart phone/Tablet with iOS APPS or Android APPS(require external wireless module MS-WMB1, sold separately)
      - Data logger compatible (require external wireless with memory module MS-WMBM1, sold separately)
      - Battery powered : 1 x 9V (6F22 / 6LR61 / 1604)
      - Dimension (LxWxD) mm : 179x94x54
      - Weight (approx.) grams : 340 (without battery)
Item no.MS-WDMMD43
Further DetailsWireless Multimeter Detector MS-WDMMD43_TE4