 |  | Wireless Connectivity Digital Multimeter Detector MS-WDMMD23 - Accurate measurement |
| |  |  |
| Introduction :
MS-WDMMD23 is a external wireless connectivity Digital Multimeter Detector integrated with 6000 Count, True RMS, auto and manual measurement.
One of the most advantages of the meter is wirelessly connect to Smart phone / Tablet / PC (require different external wireless modules, sold separately) to view data, record reading, capture picture with data on it and send the information to headquarter.
Key Specifications/Special Features
- True RMS
- 6000 counts (3-3/4 digit)
- Auto/manual range
- Large LCD display with backlight
- Auto / Manual ‘V’ (AC / DC) (600V / 1000V)
- 'AC / DC external clamp adaptor input 600A, 1mV=1A
- Auto/manual resistor measurement : 0 - 60MΩ (approx.)
- Continuity check : <50Ω Beep buzzer sounds
- Capacitance : 10nF - 100mF
- Diode check : 3.0 V
- Input impedance 10MΩ
- ‘NCV’ Non-Contact AC Voltage Detection (Audible and Visible) > 100V
- ‘NCF’ Non-Contact Frequency Detection
- Freeze / Hold reading
- Auto-power off (APO) : 5 mins approx.
- Relative reading (Rel)
- Frequency / Duty cycle (Hz / % ) (10 - 10MHz / 1-99%)
- Measureable temperature from thermocouple -50°C ~ 1000°C (-58°F ~ 1832°F)
-‘K’ type temperature Ni-Cr and Ni-Si sensor, temperature range measureable -40°C ~ 250°C (-40°F ~ 482°F) to be provided
- Max. / Min. / Max. - Min. display
- Lοw battery indication (2.6V approx.)
- Fused test leads tted with replaceable 600mA (Ø6x32mm) fast blow fuse (included)
- Standalone mode : without external wireless module.
- Wireless connectivity transmit data to Smart phone/Tablet with iOS APPS or Android APPS(require external wireless module MS-WMB1, sold separately)
- Data logger compatible(require external wireless with memory module MS-WMBM1, sold separately)
- Battery powered : 1 x 9V (6F22 / 6LR61 / 1604)
- Dimension (LxWxD) mm : 179x94x54
- Weight (approx.) grams : 330 (without battery)
|  | Item no. | MS-WDMMD23 |  | Further Details | Meter MS-WDMMD23_TE4 |  |
| |
|
|