 | | | Wireless Connectivity Digital Multimeter Detector connected to Smart phone |
| | | |
| Introduction :
This is a external wireless connectivity Digital Multimeter Detector integrated with 6000 Count, True RMS, auto and manual measurement.
One of the most advantages of the meter is wirelessly connect to Smart phone / Tablet / PC (require different external modules, sold separately) to view data, record reading, capture picture with data on it and send the information to headquarter.
Key Specifications/Special Features :
- True RMS
- 6000 counts (3-3/4 digit)
- Auto/manual range
- Large LCD display with backlight
- Auto / Manual ‘V’ (AC / DC) (600V / 1000V)
- Auto/manual resistor measurement : 0 - 60MΩ (approx.)
- Continuity check : <50Ω Beep buzzer sounds
- Capacitance : 10nF - 100mF
- Diode check : 3.0 V
- Input impedance 10MΩ
- ‘NCV’ Non-Contact AC Voltage Detection (Audible and Visible) > 100V
- ‘SPT’ Single Probe Test AC Voltage (Audible and Visible) > 100V
- ‘NCF’ Non-Contact Frequency Detection
- Freeze / Hold reading
- Auto-power off (APO) : 5 mins approx.
- Relative reading (Rel)
- Frequency / Duty cycle (Hz / % ) (10 - 10MHz / 1-99%)
- Max. / Min. / Max. - Min. display
- Lοw battery indication (2.6V approx.)
- Fitted with replaceable 600mA (Ø6x32mm) fast blow fuse
- Standalone mode : without external wireless module
- Wireless connectivity transmit data to Smart phone/Tablet with iOS APPS or Android APPS(require external wireless module MS-WMB1, sold separately)
- Data logger compatible (require external wireless with memory module MS-WMBM1, sold separately)
- Battery powered : 1 x 9V (6F22 / 6LR61 / 1604)
- Dimension (LxWxD) mm : 188x96x58
- Weight (approx.) grams : 395 (without battery)
|  | Item no. | MS-WDMMD70 | | Further Details | Multimeter MS-WDMMD70_TE4_ |   |
| |
|
|
|