Product show case > Wireless Connectivity Series > Bluetooth Integrated > Clamp Meter
Wireless Connectivity AC/DC Clamp Meter

Introduction :
This is a Bluetooth with memory Integrated wireless connectivity AC/DC clamp meter

Specification :
-Max. Voltage between Terminal and Earth : CAT II, 600V(AC/DC), CAT III, 300V (AC/DC)
-Count /Digit : 6000/3-3/4
-Auto/Manual 'V' (AC/DC) 600V
-Auto/Manual 'V'(AC) with Hz/% selectable
-Auto/Manual 'Ω' (60MΩ)
-Continuity <50Ω , Beep
-Diode check : 3.000V 
-AC / DC current  : 600A/1000A
-AC current with Hz / % selectable 
-Capacitance : 10nF - 100mF 
-Frequency 10Hz - 10MHz 
-Hz / Duty cycle 1-99% 
-‘NCV’ Non-Contact AC Voltage Detection (Audible and Visible) > 100V : Numerical digital display AC voltage strength 
-'SPT' Single Probe Test AC Voltage (Audible and Visible ) >100V
-‘NCF’ Non-Contact Frequency Detection 
-Input impedance 10MΩ 
-Auto power off : (5 mins) or always 'ON' 
-Anti Burn Protection (ABP) on full range and up to 250V (AC/DC)
-Max./Min./Max.- Min. reading & Freeze/Hold reading
-Relative Reading
-Low battery indication (2.6V approx.)  & 'OL'Over range display
-Maximum Conductor diameter for measurement (mm) < Ø50 
-Maximum open jaw (mm) : Ø50 
-Measureable temperature from thermocouple -50°C ~ 1000 °C (-58°F ~1832°F)  
-'K' type temperature Ni-Cr and Ni-Si sensor, temperature range measureable -40°C ~ 250°C ( -40°F ~ 482°F) to be provided 
-Stanalone mode of Bluetooth Connectivity transmit data to Smart phone/Tablet with iOS APPS or Android APPS
-Data logger compatible (Bluetooth with memory integrated)
-Battery powered : 2 AAA (R03 / LR03 ) 
-Dimension (LxWxD) mm : 208x77x35 
-Weight (approx.) grams : 162 (without battery) 
Item no.MS-BM376DFT
Further DetailsBM376DFT.JPG